Leading Provider of

Asphalt Solutions

Opening Times

Mon - Sat: 7.00 - 18:00

Our Guarantee

100% Customer Satisfaction

Asphalt Driveway Cost Sydney | Bitumen Driveways Prices In Australia

Asphalt Driveway Cost Sydney | Bitumen Driveways Prices In Australia

The decision to install an asphalt driveway in Sydney requires consideration of many factors. A primary consideration is cost. 

You can invest significantly in your home by installing an asphalt driveway in Sydney. Your property will look better and be worth more, thanks to it. According to the size and complexity of the project, installing an asphalt driveway costs between $2,000 and $4,000.

The lifetime value of an asphalt driveway may seem high, but consider what it adds to your home. You’ll have plenty of use out of an asphalt driveway if appropriately maintained, so you won’t need to replace it for a long time. 

For more information and a free estimate, speak with a professional Asphalt driveway contractor in Sydney.

Factors affecting asphalt installation prices

Asphalt driveways are inexpensive, but several factors affect the final price, especially when homeowners have to lay a new driveway. Several factors can impact the cost of asphalt paving, including the following.

Material Cost:

Several factors affect the raw price of your driveway or parking lot, including freight, market prices, and fuel surcharges.

Drainage and other additions:

Maintaining proper drainage on any paved surface is essential to extend its life.

Base Coat: 

Apply two coats, a base coat, and a top coat. A paved surface will last longer if the base is made of top-quality materials and is given adequate attention. The cost per square foot ranges from $1 to $2.50.

Specialized Top Coats and Sealants: 

A general top coat and sealant cost $1-$2.50 per square foot. Add $3-$5 per square foot for chip seals and stamped topcoats.

Excavation and Clearing: 

It is essential to guarantee that there will be enough space to lay the new pavement if there isn’t a previous surface.


To ensure proper drainage, gravel should be installed 8-10 inches under the asphalt. This can increase a square foot surface area by $1 to $2.50.

Why You Should Install Asphalt

Asphalt driveway cost Sydney is a hot topic for debate. Some people think installing an asphalt driveway is too expensive, while others believe the benefits outweigh the costs. In this essay, I will favor installing an asphalt driveway.

The first reason an asphalt driveway is a good investment is that it lasts longer than other driveways. Asphalt can last up to 20 years, whereas concrete only lasts about 10 years. This means that you will not have to spend money on repairs or replacements as often with an asphalt driveway.

Another benefit of having an asphalt driveway is that it increases the value of your home. A recent study found that homes in Sydney with blacktop driveways sell for $8,000 more than homes without them! So not only does having a blacktop driveway save you money in the long run, but it also increases the value of your home should you ever decide to sell it.

Finally, one of the best things about having an asphalt driveway is that it’s easy to maintain and keep clean. All you need to do are occasional sweeping and hosing down, and your drive will look like new year after year!

Different types of asphalt driveways and their prices

Asphalt driveways can be classified into three types. The cost per square meter ranges from $25 to $40. The aggregates used in each type will affect the price of a hot mix driveway and the cost of a warm mix driveway. The majority of Aussies prefer mastic asphalt driveways. In this case, 30 dollars per square meter would be reasonable.

Calculate an Estimated Cost Accurately

Tip #1 – Knowing how much asphalt you need and what type of asphalt mix you want is essential. Additionally, you will need to remove your old driveway and slope. By multiplying the width times the length times the depth, you can determine how many square meters of asphalt you will need.

Tip #2 – An excellent way to get an accurate estimate is to contact several asphalt contractors and get their written proposals. Before signing any contracts, you should get three to five written estimates. Proposals should contain extensive information, including the amount of asphalt and pricing for the groundwork and removal.

A Guide to Hiring Asphalt Contractors in Sydney

Tip #1 – Obtaining written estimates and references should be the first step in hiring an asphalt contractor.

Tip #2 – A valid license and insurance proof is essential, as well as asking what warranty they offer.

Tip #3 – Asphalt contractors without insurance should not be on your property because they can hold you responsible if something goes wrong. The status and qualifications of a contractor can also be checked.

How to Save Money When Hiring an Asphalt Contractor

Tip #1 – Removing and disposing of an existing driveway is one of the most significant cost factors. You can save $1,000 or more in your shed if you rent a jackhammer and use some garden equipment. A truck or utility trailer will be necessary to transport the debris to your local landfill facility to dispose of the old driveway.

Tip #2 – Choose an asphalt contractor that works within your budget, get multiple quotes, and understand which company can provide references, licenses, and insurance. Transport costs can increase if you choose contractors too far away.

Tip #3 –The summer season is the most popular time to hire an asphalt contractor. Ask your contractor if you want to have a carport or walkway installed during your driveway project. The paving equipment will be available to your contractor, saving you money. Your asphalt contractor should also have easy access to the area.